The Gen3 model has been enhanced to improve the reliability
and longevity of our PA10 platform. This new platform includes several
features that have never before been included on our PA-10 platform. We
hope you enjoy these new features and look forward to your feedback!
Gen 3 Benefits at a glance:
- Lower Includes relief cuts for a broader compatibility with 308 BCG's
- Twice Staked Castle Nuts
- Standardized carbine length buffer tube with short, heavy buffer
- 4150V Chrome Moly Vanadium Nitrided Barrel
- 5 Position Adjustable Click Switch Gas Block
- Extra Power Extractor Springs
- 7075 T6 Charging Handle Included in all uppers
- Black Nitride Gas Tube
- Barrel Nuts properly torqued to military specifications
- Anti-slip and anti-rotation handguards
With enhanced durability and improved function, the new and improved
PSA PA10 Gen3 is here. The Gen3 model offers a black nitride stainless
gas tube to better resist high heat and corrosion while maintaining a
glossy black finish. All Gen3 PA10 models come with a dimpled barrel
for ease of gas block replacement if you choose to do so. We have also
included a newly designed click switch 5-position adjustable gas block
so you can specifically tune to your load.
The Palmetto State Armory PA10 Gen3 features a forged receiver set
that has been designed with a relief cut geometry to allow the use of a
wider variety of aftermarket bolt carrier groups. A carbine length
buffer tube with a short, heavy buffer coupled with a standard PA10
buffer spring. All Gen3 PA10 rifles from Palmetto State Armory come
equipped with a Toolcraft BCG, which ensures thousands and thousands of
rounds will feed through the rifle. This model includes a Geissele
Super Semi-Automatic Enhanced Trigger.
Barrel: Nitrided Chrome-Moly barrel, chambered in
308 WIN with a 1/10 twist, and a mid-length gas system. This upper is
paired with a Palmetto State Armory 15" M-Lok free-float rail, low
profile adjustable click detent 5 position gas block, and an A2-style
muzzle device. The gas system is enhanced with a nitrided gas tube in
order to better resist high heat and corrosion.
Upper: Precision machined from forged 7075-T6
aluminum, then Black anodize hard coated to MIL-8625 Type 3 class 2.
With enhanced dual retention anti-slip and anti-rotating handguards.
Bolt Carrier Group: Tool craft 9310 steel bolt
assembly with extra strength extractor springs that is nitride for
increased durability. 8620 carrier, nitride treated, with a nitride
treated gas key properly staked with grade 8 fasteners. A 7075 T6
aluminum charging handle is also included.
Lower: Precision machined from forged 7075-T6
aluminum, these lowers are then Black anodize hardcoated to MIL-8625
Type 3 class 2. With a Geissele Super Semi-Automatic Enhanced (SSA-E)
Trigger, a Magpul STR Stock, and a PSA Overmolded A2 Grip. This is an
ideal platform for the .308 cartridge.
Geissele Super Semi-Automatic Enhanced (SSA-E) Trigger:
- Type: 2 Stage
- 1st Stage Weight: 2.3lbs.
- 2nd Stage Weight: 1.2lbs.
- Total Pull Weight: 3.5lbs.
- Adjustable: No
- Recommended Use: Target Shooting, Precision Shooting
- Pin Size: Mil-Spec
- Trigger Bow Type: M4 Curved
- Weapon Platform: AR15/AR10