MFP-G (Magazine Floor Plate, Glock) is a replacement floor
plate/base plate for Glock 9mm and .40 cal double column magazines.
Machined from solid 6061 aluminum and hard coat Type III anodized, it is
available in either standard or flared versions.
MFP,
G was designed and made for duty and defense applications. Its lines
and shape are dictated by the functions it was designed to perform, its
looks are subtle and modest, but for the flutes on the sides and a
tastefully small and hard to find Cygnus logo engraved on the bottom,
it's difficult to tell it apart from a factory Glock magazine floor
plate. There will be no red, white or blue anodized variants of MFP-G.
Most
Glocks have a semi circular cutout at the rear base of the grip to
enable users to manually strip the magazine from the grip/magazine well
should it fail to drop free. G17M and G19M also have the semi circular
cutout in front of the base of the grip. MFP-G improves on this
built-in Glock feature by giving the magazine a front lip a reverse
angle that's missing on factory Glock magazine floor plates, the simple
and subtle change provides the user with ample surface area and positive
grasping space to manually strip/pull the magazine away from the weapon
by using the front and back bottom of the magazine.
Should
the user choose to grasp and pull the magazine from the sides, MFP-G
also provides two long and wide flutes along the sides that are
essentially coarse serrations. There's no right or wrong way to strip
and pull the magazine, MFP-G provides the user the means to do so from
accessing the magazine's front and rear, or left and right.
Two
options are available: standard and flared. MFP-G, Standard has a
front lip that does not protrude beyond the front of the magazine well,
while MFP-G, Flared has a front lip, or duck tail, that slightly extends
forward of the magazine well, which comfortably encloses and confines
the shooter's hand where it belongs be on the grip, and offers better
weapon retention as a result. Both versions are compatible with duty
magazine pouches, as they are only slightly thicker than OEM Glock
magazine floor plates.
MFP-G also makes
stripping the magazine from a pouch easier by providing useful and much
improved, an intuitive grasping surface areas lacking on factory
magazines floor plates. MFP-G was designed for LE magazine pouches
compatibility, its compact size also works wonderfully well on MOLLE
magazine pouches.
Length: 1.833 (MFP-G, Flared), 1.717 (MFP-G, Standard). Glock Gen 5 factory magazine floor plate is 1.701 for reference
Width: 1.132. Glock Gen 3 factory magazine plate is 1.300.
Weight: 0.50oz (MFP-G, Flared), 0.47 oz (MFP-G, Standard)
NOTE:
* Do not use MFP-G with an add on mag well. An add on mag well masks usable surface area in front and
on the sides. If
you have an aftermarket mag well (IF it's compatible), it will diminish the functionality and usefulness of
MFP-G,.
*
Compatible with Glock factory 9mm and .40 cal pistols that use double
column magazines, but is NOT compatible with G19X and G26 with the
closed mag well front.
*
Remove any mag well plug/tool in the magazine well, the presence of any
object that covers the semi circular cutout on the back of the grip
hinders the user's ability to strip the magazine out from the front and
back of the magazine floor plate.
[ITEMPRICE]