Note: This Handguard is for LARGE FRAME ARs
Centurion Arms' patented CMR rail system is a lightweight, rugged, one piece, free float hand guard that, when installed, gives the upper a continuous 12 o'clock rail. The CMR system clamps to a proprietary barrel nut that can be installed on 7.62/.308 based AR platform systems. It was designed with the top 1913 rail for mounting the most common accessories, yet does away with the need for 1913 rail at the 3, 6, and 9 o'clock positions and using the MLOK mounting system. Additionally, this rail houses built-in anti-rotation QD sling swivels in 4 positions. The main objective was to have a smaller, lighter weight, more ergonomic, hand guard that maintains or enhances functionality for the end user.
Features
***Current CMR MLOK models are DPMS high pattern receivers***
Material: 6061 T6
Finish: Type III hard coat anodized
Integrated QD Attachment sockets - Limited Movement
Weight with barrel nut: 15in-16.3 oz
Barrel nut: 4.6 oz 2.5 in long / 1.53 O.D. / I.D. to fit up to 1.2 in barrel
Length : 15in (15in)
Width: 1.7 in (body of tube) 1.96 in (at QD Sling Swivels)
Height: 2.406in (Rear) 2.114in (Front)
Inside Diameter: 1.441 in
Rails: 1913 spec rail on top
Barrel nut: 4130 steel and 2.5in long
Made in USA
*** We recommend gunsmith installation for all of our parts. We cannot warranty items damaged by improper installation.
***IMPORTANT PLEASE NOTE***
- Screws, proprietary barrel nut, and wrench are included with the purchase of all rail systems. Replacement screws, barrel nuts, and wrenches are available to purchase if necessary.
[ITEMPRICE]