NOTE: ESF-H1 has a single rear facing QD swivel socket.
ESF-H1 (End plate, Sling Adapter, Forward Controls Design, Heavy, 1 socket) is a drop
in end plate replacement for the AR platform (both 223 and 308 spec).
ESF-H1 is available in
4140 steel, DLC or phosphate coated versions. ESF has
rotation limited side facing sockets. The rear facing socket has no
limiters, as the receiver extension effectively limits the swivel’s
End plates that incorporate side facing QD swivel sockets can
mask available wrench notches required for torquing. A conventional
castle nut wrench has 3 lugs, in some cases, the socket housing may
partially block access to one of them. A 2 lug castle nut wrench, such
as the AR Multitasker, or our JCW (Joint Castle nut Wrench) would be
required to torque the castle nut properly.
ESF's receiver extension indexing tab can be tight on some receiver extensions.
(rear socket only) does not have rotation limiters, as the QD sling
swivel is prevented from rotating 360 degrees by the receiver extension.