6315RF a Plan B compatible flash suppressor / compensator sound suppressor mount, a collaboration is between Revival Defense and Forward Controls Design.
Based
on the successful 6315 design that's been well proven on many of our
Dead Air Keymo and Xeno devices, 6315 is a closed bottom flash
suppressor / muzzle rise compensator that provides 15 to 20% better
compensator performance, without the extra muzzle flash, concussion and
noise normally associated with a compensator. 6315's shorter and
smaller 3 o'clock and 9 o'clock ports force more gas to be vented
through the 3 upward facing ports.
6315RF, like
all 6315 family of flash suppressor / compensator, has a closed bottom,
which requires timing to ensure the center port faces 12 o'clock dead
center. We most likely will not produce an A1 (8 port, spaced equally
around the circumference of the flash suppressor) form factor, 3 or 4
prong muzzle device. This is a design decision based on practicality
and function.
6315RF
has external 0.900 x 24 threads, compatible with sound suppressors with
0.900 x 24 threads (such as CGS and Plan B) and adapters such as
Rearden's Atlas adapter.
Length: 1.725"
Weight: 2.08oz
Internal threads: 1/2 x 28
External threads: 0.900 x 24
Wrench flats: 3/4"
TDP
spec A2 and 6315RF flash suppression comparison. Predictably,16"
barrels don't produce much flash signature, while occasional fireballs
erupt out of a 10.5" barrel, not uncommon with short barrels. Ammo can
and does change flash signature, we used Winchester M193 55 grain for
testing and not low flash ammo.
6315RF's length
is shorter than that of a TDP spec A2, (1.76" overall length, with
0.79" available for ports), 6315RF is shorter (1.725" overall length,
with 0.675" available for ports), its flash suppression performance is
similar to the A2.
